Features
- Available in two models—42 stations with 8 independent programs and
8 start times per program OR 128 stations with 16 independent programs and 16 Start Times per program. - Run times available in seconds and minutes, or minutes and hours depending on program.
- 4 independent two-wire outputs provided, each capable of running up to 12,000 linear feet on standard 14 gauge wire and operating from 1 to 80 valves with LogicPLUS 42 and up to 128 valves with LogicPLUS 128.
- Each valve has its own LogicPLUS receiver. Each receiver can be programmed at the controller or in the field with an optional hand-held remote programmer (part # LP-HHRP) from valve #1 to #128. Each receiver can be re-programmed an infinite number of times to different valve numbers as desired.
- Each independent program can operate on any calendar schedule
from 1—28 days including specific days of the week or an odd/even
day watering schedule. - Operate up to 4 valves simultaneously of the same number or
different numbers plus one Master Valve/Pump start relay and one Fertigation Valve/Pump relay. - When the LogicPLUS controller is OFF, or when no activity is scheduled to occur, power output to the field is terminated. Most other two-wire controllers maintain constant line voltage output to the field, so all receivers receive power continuously. A big liability exists with this continuous power state. If a receiver is shorted by lightning, or a problem develops within the receiver, it potentially may keep a valve activated indefinitely, causing the likelihood of flood damage. The LogicPLUS technology eliminates this liability.
- LogicPLUS is compatible with all standard 24 VAC solenoids found on standard irrigation valves. Diode bridge and latching type solenoids are excluded.
- Additional operational features include; Water Budget, a “Looping” option on program 6, Manual and Semi-automatic Operation, Programmable Test Cycle, Programmable “Rain Delay,” Total Accumulated Run Time display per program, Programmable Fertigation Cycling and Fertigation Pump Relay, “Start” Sensor input on program 6, Whole controller “Off/Rain” Sensor input, Programmable Pump Start/Master Valve by program, “Clear program” or “Clear all” function.
- Notable Mechanical Features include; a Modular power surge package, a relative Amperage draw display during all operations, an available “security” lockout code, a Radio Remote Ready interface with the HIT Model TRC Commander or Sidekick units, wire tracing compatibility with the Tempo 521 Locator Low Voltage Tracer, and a Stainless Steel, housing with an optional Stainless Steel pedestal.
